|
Smithy Mini Benchtop Milling machines:
These mills are get for small shops, laboratories, garages
and basements. For milling and drilling. They come with R8 spindles to
use standard milling machine collets and cutters.
|
This is a heavy duty benchtop milling machine. Column downfeed
on dovetail ways. Work quickly without hunting around for special
tools. This mill uses standard R-8 tooling. You won't have to reset
your work between flat cuts and angles. Work at any angle with the
rotating head. Use the entire surface of the table for large projects
or complicated setups. Gear-drive gives quick, accurate speed changes.
Uses 110 volts electricity. Work big projects on the large capacity
31-1/2" X 9-1/2" table. Clamp directly to the table using the four
full length 5/8" T-Slots. The adjustable mill head is easily positioned
and features a positive locking system for chatter-free performance.
Power: 1.5 HP, 110 volts, 16 Amps
Machine Weight: 660 Lbs
Machine Size: 35" L x 47" W x 56" H
T-slots: 5/8"
Max longitudinal X-travel: 19-3/4"
Max horizontal Y-travel: 6-3/4"
Spindle taper bore: R-8 (fits standard mill collet)
Chuck arbor size:
R8/JT33
Maximum drill size: 1"
Maximum tap size: 1/2"
Spindle speeds: 6 (95 to 1500 rpm)
Quill travel: 5"
Spindle fine feed dial calibrated to .001"
|
This gear-driven milling machine is ideal for the shop that
needs a versatile, bench-top milling machine with the power of a
1.5 hp motor.
Head swivel: 90°
- right and left
Head travel: 15.5"
Spindle to table distance: 1.5 to 17"
|
|
Power Feed on X, Y, & Z axis!
Power tapping with depth stop!
Work on large surfaces. The 40 x 9 1/2" table travels 25" longitudinally
and over 6 3/8" horizontally. It's easy to use just the right speed
every time with this mini milling machine's geardrive. Work quickly
without hunting around for special tools. This benchtop mill uses
standard R8 tooling. Use the entire surface of the table for large
projects or complicated setups. Gear-drive gives quick, accurate
speed changes.
You can control all functions on this machine from the swing
arm with the 9 button panel. This machine features a power feed
on all three axis, which improves accuracy, speed, and convenience.
The rigid Z-Axis Dovetail way provides stability and increased accuracy.
• Power Feed on X, Y, & Z axis.
• Vertical dovetail ways moving head up and down without losing
alignment.
• Power height adjustment of the mill head
• Power tapping up to 1/2" (12 mm)
• Electronic Digital Readout on mill spindle
• Automatic depth stop on spindle powerfeed.
• Backlash adjustments on lateral and longitudinal feeds.
• Backlash Adjustment on X & Y feeds.
• Each gear box has an individual oil reservoir.
• Gear drive on spindle and power feeds - no belts to slip.
• Uses standard R8 tooling
Power: 2 HP, 220 volts, 1 phase, 10 Amps
Machine Weight: 781 Lbs.
Machine Size: 38.5"L x 55"W x 56"H
|
Table size: 40 x 9.5"
T-slots: 5/8"
Max longitudinal travel: 25"
Head travel: 15.5"
Spindle taper bore: R-8
Spindle speeds: 6 (95 to 1500 rpm)
Spindle travel: 3"
Spindle fine feed dial calibrated to .001"
Spindle feeds: .0024 - .0118"/rev.
Spindle travel: 5"
Max drilling: 1"
Max Face Milling: 3"
Tapping Capacity: 1/2"
Head swivel: 90°
Spindle to table distance: 16.25" max
Spindle to dovetail column: 11"
|
Rong
Fu model RF-31 Drill-Mill .
• Motor:
1.5 HP, 110 volt 1 phase or 220 volt 3 phase
• 1 Speed Motor:
150-3000
• Spindle Taper : MT3 or R8
• Spindle Stroke: 5"
• Swing: 13-3/8
• Working Table: 9"x 30"
• Longitudinal
travel: 16-1/8"
• Cross Travel: 7-1/4"
• Column Diameter:
4-1/2"
• N.W/G.W. : 600/660 LBS
Click to request a quote
for this machine
Options
available:
• Stand (shown)
• Power Down Feed
• 2 Speed Motor: 60 HZ
75-3000
• Longitudinal Table Power Feed |
 |
|
Rong
Fu RF-40 Geared Head Drill-Mill
• Head tilts 90°
left and 45° right and swivels
• Motor: 1.5 HP,
110v/220volt, 1 phase or 220v/440volt 3 phase
• 5 speed spindle: 60, 130,
230, 450, 1500 rpm
• Spindle Taper : R8
• Spindle/Quill
Travel: 5-1/8"
• Spindle to column: 6.5"
• Spindle to table
(max): 18.5"
• Table Longitudinal X travel: 19.75"
• Table
Cross Y Travel: 9"
• Shipping weight: 650 Lbs
Capacity:
drilling - 1.25" (steel), end mill: 3/4", face mill - 4"
•
Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor
MT3/JT6, forward/reverse switch, table with standard T-slots.
Manufactured in Taiwan.
Click to Request this
Quote
Options available: Cabinet with chip pan
(shown in photo), power down feed, 52 piece clamping kit, work
light, floor type coolant system, digital readout. |
 |
|
Rong
Fu RF-45 Geared Head Drill-Mill
• Extra heavy duty square
column design
• Head tilts 90° left and 45° right
• Motor: 1.5 HP,
110v/220volt, 1 phase or 220v/440volt 3 phase
• 5 speed spindle: 60, 130,
230, 450, 1500 rpm
• Spindle Taper : R8
• Spindle/Quill
Travel: 5-1/8"
• Spindle to column: 10"
• Spindle to table
(max): 18.5"
• Table Longitudinal X travel: 20.5"
• Table
Cross Y Travel: 8.25"
• Shipping weight: 800 Lbs
Capacity:
drilling - 1.25" (steel), end mill: 3/4", face mill - 4"
•
Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor
MT3/JT6, forward/reverse switch, table with standard T-slots.
Manufactured in Taiwan.
Click to Request this
Quote
Options available: Cabinet with chip pan
(shown in photo), power down feed, 52 piece clamping kit, work
light, floor type coolant system, digital readout. |
 |
Click for Benchtop Lathe Machines
Click for full size Bridgeport
style Milling Machines
Click for American Machine Tools Company
Homepage
|
