JET BandSaws
Jet Band Saws and Bandsaw machines. CLICK FOR HOMEPAGE

JET Band Saw Machines

The Jet Tool Company offers a wide array of bandsaw sizes for cutting metal. We like Jet machines because the are normally in stock, good quality, with tech support and spare parts quickly available. Their equipment also comes with a well written manual, something we appreciate compared to some other machines.

JET J3410 HORIZONTAL BANDSAW

Click to Request a Quote for the Jet J3410
• Adjustable hydraulic feed system
• Automatic shut-off at end of cut
• Coolant pump, tank, motor, hose, nozzle, shut-off valve
• Side blade guides with eccentric shaft, ball bearing
• Rear blade guides ball bearings
• Heat treated drive gear with bronze worm gear in oil bath
• Heavy-duty cast iron saw head and table
• Oil bath hardened and ground worm gear
• Adjustable ball bearing blade guides
• Blade wheels are made of flanged cast iron
• Rapid acting swivel vise for mitering at 45°
• Saw base has wheels
• 3/4" bi-metal blade
• Adjustable material stop
* Cutting Capacity: 7" Round at 90°
* Round at 45 Degrees: 4-1/2" diameter
* Square at 90 Degrees: 7 inches
* Rectangle at 90 Degrees: 2 x 12" or 7 x 10.5 inches
* Blade Size: 3/4 x .035 x 93 inches
* Blade Speeds: 80, 130, 180, 265 feet per minute
* Bed Height: 23-1/2 inches
* Machine Weight: 380 Lbs.
* Motor: 3/4 HP, 115 Volts, 1 phase, only

JET J3410 Horizontal BandSaw

JET HBS-814GS Geared Head HORIZONTAL BAND SAW

Click to Request a Quote for the Jet HBS-814GS
• Heavy duty geared head transmission fast speed changes
• Easy accessible control panel for operator use
• Hydraulic controlled down feed rate
• Portable on wheels
• Hardened and ground worm gears
• Quick action swivel vise miters at 45°
• Coolant system
• 3/4" Carbon steel blade with chip brush
• Adjustable material stop
* Cutting Capacity: 8" Round at 90 Degrees
* Round at 45 Degrees: 6-1/2 inches
* Square at 90 Degrees: 8 inches
* Rectangle at 90 Degrees: 8 X 14 inches
* Rectangle at 45: 2 x 7 inches
* Blade Size: 3/4 x .035 x 97 inches
* Blade Speeds: 135, 197, 256 feet per minute
* Bed Height: 26 inches
* Machine Weight: 444 Lbs.
* Motor 1 HP, 115/230V, 1 phase, Prewired 115Volts

JET HBS-814GS Geared Head Horizontal Band Saw

JET J9225 8-3/4" ZIP MITER HORIZONTAL BANDSAW

Click to Request a Quote for the Jet J9225
• Adjustable hydraulic feed system
• Heavy duty cast iron saw head and sturdy base
• Mitering capability to 60
• Convenient control panel
• Complete coolant system
• Hydraulic blade tension gauge
• Adjustable material stop
• Bi-Metal bendsaw blade
• Overload protection
• Quick Release Vise
* Cutting Capacity: 8-3/4" Round at 90°
* Round at 45 Degrees: 6-1/4" diameter
* Rectangle at 90 Degrees: 8-3/4 x 7 inches
* Square at 90 Degrees: 8-3/4 inches
* Blade Size: 1 x .035 x 96.5 inches
* Blade Speeds: 157, 314 feet per minute
* Bed Height: 38-7/16 inches
* Machine Weight: 542 Lbs.
* Motor 1.5 HP, 230 Volts, 3 phase only

JET J9225 Horizontal BandSaw

JET J7020 10 x 16 HORIZONTAL BAND SAW

Click to Request a Quote for the Jet J7020
• Variable speed drive with easy fine adjustment
• Exclusive 6 contact point blade guide assemblies
• Exclusive swivel control panel
• One piece wheel cover
• Heavy duty transmission hardened&ground oil bath gears
• Adjustable blade guides with 6 point contact combination
• Swing away control panel
• Patented 3 jaw rapid action swivel vise
• Cast iron blade wheels
• Adjustable material stop
* Cutting Capacity: 10" Round at 90 Degrees
* Round at 45 Degrees: 10 inches
* Square at 90 Degrees: 10 x 10"
* Rectangle at 90 Degrees: 7 X 16"
* Rectangle at 45: 6-1/2 x 11"
* Blade Size: 1 X .035 X 135 inches
* Variable Blade Speeds: 100 - 350 feet per minute
* Bed Height: 23-1/2 inches
* Machine Weight: 1000 Lbs.
* Motor: 1.5 HP, 115/230V, 1 phase, Prewired 230Volts

JET J7020 Horizontal Band Saw

 

Optional Swivel Head Available:
for easy miter cutting.
Optional Motor Available:
2 HP, 460 Volts, 3 phase

JET HBS-1018W 10 x 18 HORIZONTAL BANDSAW

Click to Request a Quote for the Jet HBS-1018W
• Large handwheel and built-in gauge for blade tensioning
• Coolant is distributed through the blade guides
• Blade guides with parallel double-row ball bearing support
• Blade brush is built-in and self-propelled
• Quick-position vise with adjustable jaws swivels to 45°
• Removable chip tray for quick clean-up
• Blade is fully guarded regardless of blade guide position
• Adjustable hydraulic downfeed with separate on/off valve
• Automatic shut-off after cut
• Carbide blade guides with rollers
• Coolant system
• 4/6 variable tooth bi-metal saw blade
• Adjustable material stop
* Cutting Capacity: 10" Round at 90 Degrees
* Round at 45 degrees: 7.5 inches
* Square at 90 degrees: 10 x 10 inches
* Rectangle at 90 degrees: 10 X 16" or 6 x 18"
* Rectangle at 45: 7-1/2 x 10"
* Blade Size: 1 X .035 X 130.5 inches
* Blade Speeds: 82, 132, 210, 330 feet per minute
* Bed Height: 23-1/2 inches
* Machine Weight: 801 Lbs.
* Motor: 2 HP, 230 Volts only, 1 phase

JET HBS-1018W Horizontal BandSaw

JET J7060 12 x 20 LARGE HORIZONTAL BAND SAW

Click to Request a Quote for the Jet J7060
• Variable speed drive system allows the operator to fine tune the blade speed fast and easily
• Exclusive swivel control panel
• Heavy duty transmission utilizes hardened and ground gears operating in an oil bath
• Balanced feed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
• Saw head raised hydraulically after each cut
• Cast iron band wheels
• Swing away control panel
• Exclusively patented 3 jaw vise allows for faster set up
• Exclusive 6 contact point adjustable blade guides (eccentric cam followers mounted on both sides of blade)
• Quick action swivel vise miters at 45°
• Coolant system
• Adjustable material stop
* Cutting Capacity: 12" Round at 90 Degrees
* Round at 45 degrees: 12 inches
* Square at 90 degrees: 12 x 12 inches
* Rectangle at 90 degrees: 12 x 20"
* Rectangle at 45: 12 x 12"
* Blade Size: 1 X .035 X 156 inches
* Variable Blade Speeds: 82 - 262 feet per minute
* Bed Height: 26-1/4 inches
* Machine Weight: 1500 Lbs.
* Motor: 3 HP, 230/460V, 3 phase, Prewired 230Volts

JET J7060 Large Horizontal Band Saw

JET HBS-1321W 13 x 21 EXTRA LARGE BANDSAW

Click to Request a Quote for the Jet HBS-1321W
• Semi-automatic bow raises after cut is complete to predetermined height
• Adjustable rate hydraulic downfeed control
• Variable blade speed allows optimum cutting performance • Safety switch shuts off motor if band breaks
• Quick-positioning vise lessens set-up time
• Large handwheel and built-in gauge for blade tensioning
• Coolant is distributed through the blade guides
• Cleaning hose and nozzle assist in washing chips away
• Easy access chip tray allows quick cleanup
• Self-propelled blade brush extends the blade life
• Automatic shut-off after cut
• Carbide blade guides with rollers
• Coolant system
• 3/4 variable tooth bi-metal blade
• Adjustable material stop
* Cutting Capacity: 13" Round at 90 Degrees
* Round at 45 degrees: 10 inches
* Rectangle at 90 degrees: 13 x 18"
* Blade Size: 1-1/4 x .042 x 161-1/2 inches
* Variable Blade Speeds: 66 - 264 feet per minute
* Bed Height: 32 inches
* Machine Weight: 1519 Lbs.
* Motor: 3 HP, 230/460 Volts, 3 phase, Prewired 230V

Jet HBS-1321W Horizontal BandSaw Machine

Click for the American Machine Tool Homepage

American Machine Tools Corp.
5864 Northwest Hwy
Chicago IL 60631 USA

Phone: 773-334-5000
Fax: 773-442-0314

Click to email us

Terms and Conditions

Privacy Clause

Frequently Asked Questions
Website by eMarketAmerica
Copyright 2014
American Machine Tools Corp.

All rights reserved
Information on this website is subject to change without notice.
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.