Flagler Machines
Flagler pittsburgh lockformer and rollformer machines and Slitters. CLICK FOR HOMEPAGE.

Flagler pittsburgh lockformer machines - made in USA
We accept Visa credit cards for up to $25,000.We accept Mastercard for up to $25,000.American Express accepted here for up to $25,000.

Buy a heavy duty Flagler rollforming machine to form your sheet metal duct work. They are well engineered and well built to last for a lifetime of heavy use. Click to go to our HVAC Tools page.

30 gauge 28 ga. 26 ga. 24 ga. 22 ga. 20 ga . 18 ga. 16 ga. 14 ga. 13 ga. 12 gauge
.0125 " .0156" .018" .024" .030" .036" .048" .060" .075" .090" .105"
.32mm .40mm .46mm .61mm .76mm .91mm 1.2mm 1.5mm 1.9mm 2.3mm 2.7mm

Flagler 24 gauge Pittsburgh Machine: $2730.

Portable Machine. 5/16" width pocket with hammer over edges. Uses 1" of metal. 24 gauge to 30 gauge.
Motor: 1/2 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 30 feet per minute.
Shipping Weight: 150 Lbs.
Dimensions: 32" long x 16" wide x 14" high

OPTIONS:
• Stand with drawer $310. (shown)
• Power Flanging Attachment $1175. (shown)

Call 773-334-5000 to order this machine.

Picture of Flagler pittsburgh lock former

Flagler 22 gauge Pittsburg Machine: $3930.
Portable Machine. 22 to 28 gauge metal.
5/16" width pocket with hammer over edges. Uses 1" of metal. Extended shafts for extra roll set.
Motor: 1/2 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 30 feet per minute.
Shipping Weight: 200 Lbs.
Dimensions: 34" long x 16" wide x 14" high
OPTIONS:
• Stand with drawer $310. (shown)
• Power Flanging Attachment $1175.
• Double Seam (ACME) rolls $670.
• Drive Cleat rolls $740.
• Right Angle Flange rolls $740.
• 180° & Open Hem rolls $710.

Call 773-334-5000 to order.
Photo of Flagler 22 gauge capacity Pittsburg lockformer machine

Flagler 20 gauge Pittsburgh Machine:
 -----------------------------------------------------
Standard Speed Machine: $4430.
Motor: 3/4 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 23 feet per minute.
Shipping Weight: 320 Lbs.
Optional Power Flanging Attachment $1190.
-----------------------------------------------------
High Speed Machine: $6640.
Motor: 2 HP, 230/460volts, 1800 rpm. Double V-belt drive.
Speed: 100 feet per minute.
Shipping Weight: 450 Lbs.
Optional Short Parts (6" minimum) Feeder $695.
Optional Upgrade to 7 station Tooling $7660.

Optional Roll Sets Standard Speed
Machine 		High Speed
Machine
Double Seam (ACME) $690. $810.
Drive Cleat $710. $890.
Right Angle Flange $710. $810.
5/16" width pocket with adjustable hammer over edges. 20 to 26 gauge.
Extended shafts for extra roll set.
Dimensions: 36" L x 17" W x 37" H.

Call 773-334-5000 to order.
Picture of Flagler 20 gauge pittsburgh lock forming machine

Flagler 18 gauge Pittsburgh Machine: $7660.
Motor: 2 HP, 230/460volts, 1800 rpm. V-belt drive.
Shipping Weight: 700 Lbs.
 -----------------------------------------------------
Flagler 16 gauge Pittsburgh Machine: $7690.
Motor: 3 HP, 230/460volts, 1800 rpm. V-belt drive.
Shipping Weight: 720 Lbs.
Optional Short Parts (6" minimum) Feeder $695.

Optional Roll Sets Metal Capacity
PRICE
Double Seam (ACME) 1/2" 16 to 22 gauge $1060.
Double Seam (ACME) 3/8" 20 to 28 gauge $1060.
Right Angle Flange 7/16" 16 gauge max. $1090.
Standing Seam 3/4" 16 to 20 gauge $1840.
Tap-In with step gauge 5/8" 22 to 26 gauge $1740.
Tap-In with step gauge 1/2" 22 to 26 gauge $1740.
Drive Cleat 1-1/8" 20 to 28 gauge $1090.
Drive Cleat Slitter & Rolls 1-1/8" 20 to 28 gauge $1360.
180° & Open Hem rolls 1/2" 16 to 22 gauge $2110.

Adjustable width pittsburg pocket with adjustable hammer over edges.
Extended shafts for extra roll set.
Speed: 45 feet per minute.
Dimensions: 56" L x 24" W x 41" H.
Call 773-334-5000 to order.

Photo of Flagler 16 gauge Pittsburg lockformer

Flagler 20 gauge Button Lock Machine: $10820.

Heavy Duty High Speed Rollformer.
Forms 1/2" male and female button snap-in lock.
20 gauge maximum, 30 gauge minimum capacity.
Motor: 5 HP, 230/460 volts, 1800 rpm.
Double V-belt drive.
Speed: 100 feet per minute.
Shipping Weight: 1000 Lbs.
Dimensions: 68" long x 24" wide x 42" high

 

Call 773-334-5000 to order this machine.

Picture of Flagler Button Snap Lock machine
Flagler S-Cleat Machine: $9610.
Forms a full reinforced S-Clip on 22 to 28 gauge metal.
Extended shafts for extra roll set on other side.
Optional Roll Sets Metal Capacity
PRICE
Pittsburgh Lock 5/16" 20 gauge $1680.
Pittsburgh Lock 3/8" 20 gauge $1680.
Drive Cleat 1-1/8" 20 gauge $1380.
Drive Cleat Slitter & Rolls 1-1/8" 20 gauge $1910.
Double Seam (ACME) 1/2" 20 gauge $1380.
Double Seam (ACME) 3/8" 20 gauge $1380.
Right Angle Flange 7/16" 20 gauge $1380.
Standing Seam 3/4" 20 gauge $2040.
Tap-In with step gauge 5/8" 22 gauge $1970.
Tap-In with step gauge 1/2" 22 gauge $1970.
180° & Open Hem 1/2" 20 gauge $2180.
Tear Drop Hem 1/2" 20 gauge $2440.
180° Hem & Kick (Drip Edge) 24 gauge $2710.
Boot Cleat 5/8" x 1" 26 gauge $4140.
Heavy Duty High Speed Rollformer.
Motor: 5 HP, 230/460 volts 1800 rpm Double V-belt drive.
Speed: 100 feet per minute.

Shipping Weight: 1200 Lbs.
Dimensions: 34" L x 16" W x 14" H

Call 773-334-5000 to order.
Photo of Flagler S Clip machine
Flagler Quad-Former: $10,990.
Comes with 2 sets of rolls down the center to form a full reinforced S-Clip on 22 to 28 gauge and to form a 1-1/8" Drive Cleat on 20 to 28 gauge.
 Also Dual auxillary shafts for 2 extra roll sets.
Optional Roll Sets Metal Capacity
PRICE
Pittsburgh Lock 5/16" 20 gauge $1680.
Pittsburgh Lock 3/8" 20 gauge $1680.
Drive Cleat 1-1/8" 20 gauge $1380.
Drive Cleat Slitter & Rolls 1-1/8" 20 gauge $1910.
Double Seam (ACME) 1/2" 20 gauge $1380.
Double Seam (ACME) 3/8" 20 gauge $1380.
Right Angle Flange 7/16" 20 gauge $1380.
Standing Seam 3/4" 20 gauge $2040.
Tap-In with step gauge 5/8" 22 gauge $1970.
Tap-In with step gauge 1/2" 22 gauge $1970.
180° & Open Hem 1/2" 20 gauge $2180.
Tear Drop Hem 1/2" 20 gauge $2440.
180° Hem & Kick (Drip Edge) 24 gauge $2710.
Boot Cleat 5/8" x 1" 26 gauge $4140.
Button snap-in Lock 1/2" 20 gauge $3070.
Full Reeves Snap Lock 7/16" 26 gauge $3610.
Modified Reeves Snap Lock 7/16 24 gauge $3610.
Slip Lock 26 gauge $3810.
Pittsburgh Type Button Lock 24 gauge $3810.

Photo of Flagler Quad-Former

Heavy Duty High Speed Rollformer.

 Motor: 5 HP 230/460volts 1800 rpm Double V-belt drive.
Speed: 100 feet per minute.
Shipping Weight: 1200 Lbs.
Dimensions: 34" L x 16" W x 14" H

Call 773-334-5000 to order.

Flagler Heavy Duty Power Flanger:
-----------------------------------------------------
20 gauge capacity: $2950.
Forms 7/32" flange on curved or straight metal pieces.
Motor: 1/2 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 23 feet per minute.
Shipping Weight: 175 Lbs.
 -----------------------------------------------------
18 gauge capacity: $3515.
Forms 1/4" flange on curved or straight metal pieces.
Motor: 1/2 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 18 feet per minute.
Shipping Weight: 185 Lbs.
-----------------------------------------------------
16 gauge capacity: $3525.
Forms 3/8" flange on curved or straight metal pieces.
Motor: 3/4 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 18 feet per minute.
Shipping Weight: 195 Lbs.

 Call 773-334-5000 to order.
Picture of Flagler Power Flanger
Dimensions: 24" L x 24" W x 38" H

Flagler 24 gauge Collar Machine: $5940.

Designed to form 1/8" hem and curl the metal from 5" diameter up to 12" diameter on 2-1/8" wide blanks.

Capacity: 24 gauge.
Motor: 1/2 HP, 115 volts, 1800 rpm. V-belt drive.
Speed: 70 feet per minute.
Shipping Weight: 200 Lbs.
Dimensions: 34" long x 16" wide

Call 773-334-5000 to order this machine.

Photo of Flagler Collar Machine

Flagler 22 gauge Gang Slitter-Beader:

Capacity: 3 cuts on 22 gauge to 26 gauge metal at a speed of approximately 60 linear feet per minute. This unit is available in 3 models - 36", 48" and 60" widths. A fully adjustable feed gauge allows for the slitting of any increments down to and including a 4" wide starting blank. These Flagler slitters will slit bronze, aluminum, brass, and other materials as well as conventional galvanized sheets. All blade assemblies are fully adjustable over width of the machine. Micrometer adjustments on the main slitting arbor for fast, positive adjustment. Completely guarded for safety. This unit is self feeding and is powered by a 1/2 HP 115 volt motor.
Duct Beader Rolls can be added for $355 per pair.
Extra pair of slitter blades can be added for $485 extra.
3 Foot wide Model GS-336 weighes 535 Lbs. $5560.
Optional Head Support $1470.
4 Foot wide Model GS-348 weighes 640 Lbs. $5780.
Optional Head Support $1660.
5 Foot wide Model GS-360 weighes 745 Lbs. $7150.
Head Support is standard on the 5 foot model.

Call 773-334-5000 to order.

Picture of Flagler Slitter

Dimensions:
GS-336: 50" L x 31" W x 34" H
GS-348: 50" L x 31" W x 34" H
GS-360: 50" L x 31" W x 34" H

 

Click for American Machine Tools Company Homepage

American Machine Tools Corp.
 5455 Northwest Hwy
Chicago IL 60630 USA
Phone: 773-334-5000
Fax: 773-442-0314
sales @ AmericanMachineTools .com

Terms & Conditions

 Frequently Asked Questions

Privacy Clause
Information in this website is subject to change without notice.
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.