Drill Press
Wilton and Republic Lagun Drill Presses. CLICK FOR HOMEPAGE.

JET Drill Press Machines American Machine Tools Company is accedited by the Better Business Bureau! Click to verify. We accept Visa credit cards for up to $25,000.We accept Mastercard for up to $25,000.American Express accepted here

The size of the drill press to buy is determined by it's capacity. Capacity is normally determined by the largest piece of stock that can be center-drilled. For instance, a 15-inch drilling machine can center-drill a 30-inch-diameter piece of stock. Other ways to determine the size of the drill press are by the largest hole that can be drilled, the distance between the spindle and column, and the maximum vertical distance between the worktable and spindle.
For much more information, click to read our huge How To Use A Drill Press webpage.
To see our huge selection of larger machines, click for our Radial Arm Drill Press section.

JET 2500/2550 15" & 20" Step Pulley Drill Presses
Click to Request this Quote
Cast iron head with spindle that four heavy duty sealed ball bearings.
Large T-slotted production work table.
3-3/8" stroke for deep hole applications.
Accurate depth stop for precise hole depths.
5/8" Drill chuck & arbor included.

Model 2500 - 15"
Model 2550 - 20"
Spindle Speeds
12 (250 - 3100)
12 (150 - 4200)
Drilling Capacity-Iron:
5/8"
3/4"
Drilling Capacity-Steel:
1/2"
5/8"
Quill Diameter
1-7/8"
2-1/4"
Column Diameter
2-7/8"
3-5/8"
Distance Spindle to Base
48-3/4
43-1/2
Table Size
10 x 10
14 x 16
Electrics
3/4 HP, 115 V
1-1/2 HP, 115 V
Weight
185 Lbs
321 Lbs
wilton 2550 drill press
JET A5816/A5818 15" Variable Speed Drill Press
Click to Request this Quote

Available as floor model or bench style
Speeds from 400 to 5,000 RPM
Handwheel adjustment sets the speeds
Large 2-1/4" quill allows greater accuracy
Full bearing support on quill for maximum spindle stiffness
6" stroke for deep hole applications.
Accurate depth stop for precise hole depths.
1/2" Drill chuck & arbor included.
Electric:1 HP, 115/220 Volts, 1 phase OR 1 HP, 220/440 Volts, 3 ph
Cast Iron Drilling Capacity: 5/8"
Steel Drilling Capacity: 1/2"
Column Diameter: 3"
Distance Spindle to Column: 7-1/2"
Distance Spindle to Table: 41"
Table Size: 15-1/4 x 17-3/4"
Height: 67-1/2",
Weight: 436 Lbs.
wilton A5816 drill press

JET 2221/2223VS 20" Variable Speed Heavy Duty Drill Press
Click to Request this Quote

Variable spindle speeds from 300 to 2000 RPM .
6" spindle/quill travel ? External #3 Morse Taper.
Front mounted positive control depth stop.
Massive 3" quill diameter.
Heavy duty cast iron design.
Large precision ground T-slot production table for easy set ups.
Front or side rack and worm gear table raiser.
Table rotates 360 around the column.
Machined T-slotted base.
Head is massively constructed for more accuracy and rigidity.
Electric:1.5 HP, 115/220Volts, 1 phase OR 2 HP, 220/440 Volts, 3 ph
Cast Iron Drilling Capacity: 1-1/4"
Steel Drilling Capacity: 1-1/4"
Column Diameter: 4-1/2"
Distance Spindle to Column: 10-7/16"
Distance Spindle to Table: 32-3/8"
Table Size: 18-1/8 x 14-3/4"
Height: 77-1/4"
Weight: 715 Lbs.
Options:
3/4" Chuck with adapter for #3 morse taper
Coolant System

JET 2232/2234AC 20" Electronic Variable Speed Drill Press
Click to Request this Quote

Variable spindle speeds from 65 to 2000 RPM. Great for Tapping.
High torque at all speeds both forward and reverse for tapping.
Latest AC inverter variable speed technology.
Continuous speed adjustment while in operation.
Front mounted LED spindle RPM readout.
Front mounted positive control depth stop.
Electrics: 2 HP, 220/440 Volts, 3 phase.
#3 Morse taper spindle.
Emergency stop
Cast Iron Drilling Capacity: 1-1/2"
Steel Drilling Capacity: 1-3/8"
Column Diameter: 4-1/2"
Distance Spindle to Column: 10-7/16"
Distance Spindle to Table: 32-3/8"
Table Size: 18-1/8 x 14-3/4"
Height: 82-1/4"
Weight: 792 Lbs.
Options:
3/4" Chuck with adapter for #3 morse taper
Coolant System
JET 2232AC Drilling & Tapping Press.

JET model GHD-20T 20" Geared Head Drill Press:
Click to Request this Quote

Motor 2HP, 230V, 3 phase, 2-speed
Spindle speeds(12): (RPM) 120, 260, 460, 900, 1600, 3000, 60, 130, 230, 450, 800, 1500
Spindle Taper MT-3
Quill Diameter (in.) 3
Max Distance Spindle to Table ( in.) 30-1/2
T-Slots Number and Size (in.) 2 x 5/8 T-Slot Centers (in.) 9
Work Table Weight Capacity (lbs.) 275
Column Diameter (in.) 4-1/2
Drilling Capacity Cast Iron (in.) 1-1/2. Drilling Capacity Mild Steel (in.) 1-1/4. Tapping Capacity Cast Iron (in.) 13/16
Quill Travel (in.) 5
Table Size (in.) 21-3/4 x 19-1/2
Drills to Center of Circle (in) 20
Spindle Distance to Base (in.) 44-5/16
Swing (in.) 10 Base Work Table (in.) 15-1/4 x 13 Base Slots Number & Size (in.) 2 x 5/8.
Dimensions: 32 x 24 x 71. Weight 700 pounds

Features: Heavy-duty design allows a variety of precision drilling and tapping applications. Easy to read internal depth gauge. Built-in spindle lock. Head tilts left or right. Easy accessible table raiser. Large production table and T-slotted base. Integrated tapping and reversing controls. T-slotted worktable. Drill chuck arbor. Draw bar. TEFC Motor

Jet Drill Press GHD-20T 20 inch Geared Head

JET model GHD-20PFT 20" Geared Head Drill Press with power downfeed:
Click to Request this Quote

Motor 2HP, 230V, 3 phase, 2-speed
Spindle speeds(12) (RPM) 120, 260, 460, 900, 1600, 3000, 60, 130, 230, 450, 800, 1500
Spindle Taper MT-3
Quill Diameter (in.) 3
Max Distance Spindle to Table ( in.) 30-1/2
T-Slots Number and Size (in.) 2 x 5/8. T-Slot Centers (in.) 9
Work Table Weight Capacity (lbs.) 275
Column Diameter (in.) 4-1/2
Drilling Capacity Cast Iron (in.) 1-1/2. Drilling Capacity Mild Steel (in.) 1-1/4. Tapping Capacity Cast Iron (in.) 13/16. Tapping Capacity Mild Steel (in.) 1/2
Quill Travel (in.) 4-1/2
Quill Travel w/ Powerfeed engaged (in.) .004, .007, .01
Distance Base to Spindle (in.) 44-5/16 Table Size (in.) 21-3/4 x 19-1/2 Distance Column to Spindle (in.) 10 Drills to Center of Circle (in) 20 Spindle Distance to Base (in.) 44-5/16 Swing (in.) 20 Base Work Table (in.) 15-1/4 x 13
Spindle Travel (in.) 4-1/2 Manual, Auto 4-1/4
Number of Powerfeeds 3
Base Slots Number & Size (in.) 2 x 5/8
Dimensions 32 x 24 x 71. Weight 708 pounds

Features: Heavy-duty design allows a variety of precision drilling and tapping applications. Easy to read internal depth gauge. Three power down feeds. Calibrated fine down feed built-in. Built-in spindle lock. Head tilts left or right. Easy accessible table raiser. Large production table and T-slotted base. Integrated tapping and reversing controls. T-slotted worktable. Drill chuck arbor. Draw bar. TEFC Motor.

Jet GHD-20PFT 20 inch Geared Head Drill Press with power down feed

JET model J-2360 20" Geared Head Drilling & Tapping Press with powerfeed:
Click to Request this Quote

Motor 4 HP, 230/460V, 3 phase, Prewired 230V.
Spindle speeds(9)(RPM) 55, 98, 156, 198, 346, 456, 576, 822, 1338
Spindle Taper MT-4
Quill Diameter (in.) 3.465
Max Distance Spindle to Table ( in.) 30-1/2
T-Slots Number and Size (in.) 3 x 5/8
Work Table Weight Capacity (lbs.) 400
Drilling Capacity Cast Iron (in.) 2-5/32 Drilling Capacity Mild Steel (in.) 2 Tapping Capacity Cast Iron (in.) 2 Tapping Capacity Mild Steel (in.) 1-3/4
Quill Travel (in.) 10. Quill Travel w/ Powerfeed engaged (in.) 10
Quill Down feed Rates (IPR) .003, .006, .010, .014
Distance Base to Spindle (in.) 50
Distance Column to Spindle (in.) 15
Spindle Distance to Base (in.) 50
Swing (in.) 15
Max Distance - Spindle to Table (in) 30-1/2
Quill Feed 4
Spindle Travel (in.) 10
Quill Down feed Rates (IPR) .003, .006, .010, .014
Number of Powerfeeds 4
Base Slots Number & Size (in.) 5/8. Table 22 X 19
Spindle Distance to Table (max./in.) 30-1/2
Spindle Distance to Table (min./in.) 2-3/4
Base Dimensions (LxWxH) 108 x 30 x 53 inches. Weight 2405 Lbs

Features: Direct drive round column drill press with mechanical clutch. Two speed forward and reverse switch. Mechanical powerfeed clutch engagement. Heavy duty quill and spindle. Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection. Speed and feed selectors are located on one side of the drill head for convenience and ease of operation. Oversized base is precision ground with T-slots for added versatility and stability. Spindle gear box is equipped with steel hardened, ground, shafts and gears. Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation. Tilting table, 45 left and right. Powerfeed can be disengaged manually. Automatic tool ejector. Manual quill lock. Coolant system. Low voltage at switch.

Jet Drilling & Tapping Press J-2360 20 inch Geared Head

Great for Tapping.

JET model J-A2608M-PF2 20" Geared Head Drill Press with Powerfeed:
Click to Request this Quote
Motor 1 & 1.5 HP, 220 Volts, 3 phase
Spindle speeds(8) (RPM) Low-130, 260, 420, 840; High-535, 1070, 1745, 3480
Spindle Taper MT-3
Quill Diameter (in.) 2-3/8
Max Distance Spindle to Table ( in.) 35-5/8
T-Slots Number and Size (in.) 2 x 9/16
Work Table Weight Capacity (lbs.) 350
Column Diameter (in.) 3-15/16
Base Dimensions (LxWxH/ in.) 24 x 22
Drilling Capacity Cast Iron (in.) 1-3/8 Drilling Capacity Mild Steel (in.) 1-1/4 Tapping Capacity Cast Iron (in.) 5/8 Tapping Capacity Mild Steel (in.) 1/2
Quill Travel (in.) 5-1/8
Quill Down feed Rates (IPR) .004, .006, .009, .012
Drills to Center of Circle (in) 20
Table Travel (in.) 24-1/2
Max Distance - Spindle to Table (in) 35-5/8
Quill Feed Power Spindle Travel (in.) 5-1/8
Number of Powerfeeds 4
Vertical Movement of Drill Head 8-5/8
Vertical Movement of Table (in.) 24-1/2 • Table 15-3/4 x 19-3/4
Overall Dimensions 24 x 22 x 72. Weight 600 pounds

Features: Helical gears for smooth quiet operation. Quick release drill ejector. Safety latch to prevent head dropping when unclamped. Eight spindle speeds. T-Slotted table with coolant through Head and table rotate 360 degrees around column 2 position, High/Low switch 3-15/16" Column diameter English/Metric depth gauge.

Jet Drill Press model J-A2608M-PF2 20 inch Geared Head
Rong Fu RF-31 Mill-Drill
Motor: 2HP, 1 phase 110 volt or 220 volt or 3 phase 220 volt
Spindle Speeds: (12) 120 to 2500 rpm
Spindle Taper : R8
Spindle/Quill Travel: 5-1/8"
Spindle to column: 5-1/2"
Working Table: 8.25" x 28.75"
Table Longitudinal X travel: 18-1/8"
Table Cross Y Travel: 6-1/4""
Shipping weight: 700 Lbs
Capacity: drilling - 1.25" (steel), tapping - 1/2" (steel), end mill: 3/4", face mill - 4"
Standard Accessories: 3.5" angle type drill press vise, 1/2" drill chuck w/key, drill chuck arbor R8/JT6, 3" face cutter, shell mill arbor, forward/reverse drum switch, and draw bar. Manufactured in Taiwan.

Click to Request this Quote
Options available: Cabinet with chip pan, R8 collet sets (11 pieces), 52 piece clamping kit, work light, floor type coolant system, variable speed.
Rong Fu RF-31 Drill - Mill
Rong Fu RF-35 Radial Drill
Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
5 speed spindle: 340, 660, 1060, 1665, 3000 rpm
Spindle Taper : MT3
Spindle travel: 5"
Spindle horizontal travel: 14.87"
Spinde to table - Min: 6.5"
Spindle to table - Max: 24"
Spinde to column - Min: 6"
Spindle to column - Max: 20.87"
Capacity: drilling - 1.25" (steel), end mill: 3/4", face milling - 3"
Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch. Manufactured in Taiwan.
Click to Request this Quote

Options available: Cabinet with chip pan, 52 piece clamping kit, work light,
floor type coolant system.
Rong Fu RF-35 Bench Type Radial Drill Press

Rong Fu RF-40 Geared Head Drill-Mill

Head tilts 90 left and 45 right and swivels
Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
5 speed spindle: 60, 130, 230, 450, 1500 rpm
Spindle Taper : R8
Spindle/Quill Travel: 5-1/8"
Spindle to column: 6.5"
Spindle to table (max): 18.5"
Table Longitudinal X travel: 19.75"
Table Cross Y Travel: 9"
Shipping weight: 650 Lbs
Capacity: drilling - 1.25" (steel), end mill: 3/4", face mill - 4"
Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch, table with standard T-slots. Manufactured in Taiwan.

Click to Request this Quote
Options available: Cabinet with chip pan, power down feed, 52 piece clamping kit, work light, floor type coolant system, digital readout.

Rong Fu Photo of RF-40 geared Head Mill-Drill

Rong Fu RF-45 Geared Head Drill-Mill

Extra heavy duty square column design
Head tilts 90 left and 45 right
Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
5 speed spindle: 60, 130, 230, 450, 1500 rpm
Spindle Taper : R8
Spindle/Quill Travel: 5-1/8"
Spindle to column: 10"
Spindle to table (max): 18.5"
Table Longitudinal X travel: 20.5"
Table Cross Y Travel: 8.25"
Shipping weight: 800 Lbs
Capacity: drilling - 1.25" (steel), end mill: 3/4", face mill - 4"
Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch, table with standard T-slots. Manufactured in Taiwan.

Click to Request this Quote
Options available: Cabinet with chip pan, power down feed, 52 piece clamping kit, work light, floor type coolant system, digital readout.

Rong Fu Photo of RF-45 geared Head Mill-Drill

Click for Radial Arm Drill Press machines

Click to go to American Machine Tool homepage

Privacy Clause

American Machine Tools Corp.
5864 Northwest Hwy
Chicago IL 60631 USA

Phone: 773-334-5000
Fax: 773-442-0314

Click to email us

Terms & Conditions

Frequently Asked Questions

Website by eMarketAmerica
Copyright 2001-2011
American Machine Tools Corp.

All rights reserved
Information and prices on this website is subject to change without notice.
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.