Press Brake Dies	Hand Brakes	Ironworkers	Bending Rolls	Milling Machines	Line Boring
H & C-frame Presses	Press Brakes	Hydraulic Shears	Industrial Saws	Uncoilers	Lathes

Press Brake Tooling

General Purpose 90° Forming Punches and Dies - scroll down this page
Commonly used for forming 90° bends (avoid botttoming out to reduce wear). Forming bends greater than 90° is also practical by air bending. The press brake ram is adjusted to limit the depth of punch travel into the die to obtain the desired bend angle.

Click for Acute 30° Forming Punches and Dies Acute Dies are the most universal type of press brake dies. Recommended as a starter set. Make air-form bends from 30° to shallow bends, and also for first operation set in hemming.

Click for Special Purpose Punches and Dies Hemming dies, Goose Neck die punches for channel making, and Offet Bending die sets.

Click for Tonnage Requirement Chart

Click to go to Hydraulic Press Brake page

Options:
• Hook Tongue: recommend when using a segmented punch in press brakes that are fitted for hooked tongue tooling.
• Flame Hardening: recommended where extra durability and wear life is needed (such as bending stainless steel).
• Polishing: recommended when forming materials that require minimum marking (a substitute for urethane strips).

26 gauge

24 ga.

22 ga.

20 ga .

18 ga.

16 ga.

14 ga.

13 ga.

12 ga.

11 ga.

10 ga.

9 ga.

8 ga.

7 ga.

6 ga.

.018"

.024"

.030"

.036"

.048"

.060"

.075"

.090"

.105"

.120"

.135"

.150"

.164"

.180"

.194

.46mm

.61mm

.76mm

.91mm

1.2mm

1.5mm

1.9mm

2.3mm

2.7mm

3mm

3.4mm

3.8mm

4mm

4.6mm

4.9mm

General Purpose 90° Forming Punches and Dies
Note: Using wider dies than necessary can decrease the tonnage required to make a bend. The disadvantage of using wider dies is that the minimum size flange you can bend up becomes larger and so does the inside radius.

Number 1 - 11 Gauge Punch
Number 1 - 11 Gauge
4 foot $312., 6 foot $374.
8 foot $469., 10 foot $562.
12 foot $625., 14 foot $686.
16 foot $781., 20 foot $999.
Call for larger size prices.

A combination of the Number 1 Punch and the Number 2 Die is the most commonly used in industry for forming 90° bends. Forming bends greater than 90° is also practical by air bending. The press brake ram is adjusted to limit the depth of punch travel into the die to obtain the desired angle.
To increase the life of your tooling, avaoid bottoming the top die in the bottom die.

Number 1A - 14 Gauge
4 foot $373., 6 foot $449.
8 foot $561., 10 foot $671.
12 foot $747., 14 ft $822.
16 foot $934., 20 ft $1195
Call for larger size prices.

Relief on sides of Number 1A Punch permits closer back gauge clearance and longer returns than are possible with a Number 1 Punch. Load is on punch shoulders, not on ram slot as in dies without shoulders. This punch is useful for forming up to 14 gauge with Number 2 Dies of 1/4" through 5/8" openings.

Number 2 die - 22 gauge die
No. 2 - 1/4" - 22 Gauge
4 foot $227., 6 foot $273.
8 foot $340., 10 foot $407.
12 foot $453, 14 foot $497.
16 foot $567, 20 foot $724.
Call for larger size prices.

No. 2 - 3/8" - 18 Gauge
4 foot $227., 6 foot $273.
8 foot $340., 10 foot $407.
12 foot $453, 14 foot $497.
16 foot $567, 20 foot $724.
Call for larger size prices.

No. 2 - 1/2" - 16 Gauge
4 foot $227., 6 foot $273.
8 foot $340., 10 foot $407.
12 foot $453, 14 foot $497.
16 foot $567, 20 foot $724.
Call for larger size prices.

No. 2 - 5/8" - 14 Gauge
4 foot $251., 6 foot $301.
8 foot $377., 10 foot $452.
12 foot $503., 14 foot $552.
16 foot $628., 20 foot $803.
Call for larger size prices.

No. 2 - 3/4" - 13 Gauge
4 foot $268., 6 foot $322.
8 foot $404., 10 foot $485.
12 foot $539., 14 foot $593.
16 foot $674., 20 foot $861.
Call for larger size prices.

No. 2 - 7/8" - 12 Gauge
4 foot $268., 6 foot $322.
8 foot $404., 10 foot $485.
12 foot $539., 14 foot $593.
16 foot $674., 20 foot $861.
Call for larger size prices.

No. 2 - 1" - 11 Gauge
4 foot $282., 6 foot $338.
8 foot $422., 10 foot $507.
12 foot $563., 14 foot $619.
16 foot $704., 20 foot $902.
Call for larger size prices.

No. 3A - 10 Gauge Punch
4 foot $354., 6 foot $426.
8 foot $532., 10 foot $639.
12 foot $711., 14 foot $781.
16 foot $888., 20 foot $1136.
Call for larger size prices.

A Number 3 Punch and a Number 4 Die are used to produce 90° bends in heavy gauge metals or plate. Most forming in this category is performed by air bending, in order to keep press brake tonnage capacities to a minimum and to prevent material fracture. The inside radius of the resulting bends will be equal to, or greater than the material thickness indicated with the different dies.

No. 4 - 1 1/8" - 10 Gauge
4 foot $307., 6 foot $367.
8 foot $459., 10 foot $551.
12 foot $612., 14 foot $674.
16 foot $766., 20 foot $979.
Call for larger size prices.

No. 3B - 1/4" Capacity Punch 4 foot $392., 6 foot $470. 8 foot $589., 10 foot $705., 12 foot $783. 14 foot $861., 16 foot $979., 20 foot $1254. Call for larger size prices.	No. 4 - 1 1/4" - 9 Gauge 4 foot $392., 6 foot $470. 8 foot $589., 10 foot $705., 12 foot $783. 14 foot $861., 16 foot $979., 20 foot $1254. Call for larger size prices.
No. 4 - 1 1/2" - 3/16" Capacity 4 foot $532., 6 foot $639. 8 foot $800., 10 foot $959., 12 foot $1065. 14 foot $1172., 16 foot $1465., 20 foot $1704. Call for larger size prices.	No. 4 - 2" - 1/4" Capacity 4 foot $685., 6 foot $823. 8 foot $1029., 10 foot $1234., 12 foot $1371. 14 foot $1508., 16 foot $1714., 20 foot $2193. Call for larger size prices.

No. 3C - 3/8" Capacity
4 foot $471., 6 foot $565.
8 foot $707., 10 foot $849.
12 ft $943., 14 foot $1036.
16 foot $1178, 20 foot $1508.
Call for larger size prices.

No. 4 - 2 1/2" - 5/16" Capacity
2 foot $685, 4 foot $807., 6 foot $969.
8 foot $1211, 10 foot $1454, 12 ft $1615
14 foot $1778, 16 ft $2021, 20 ft $2585.
Call for larger size prices.

No. 4 - 3" - 3/8" Capacity
2 foot $831, 4 foot $1053., 6 foot $1263.
8 foot $1579, 10 foot $1894, 12 foot $2105.
14 foot $2316, 16 foot $2632, 20 foot $3369.
Call for larger size prices.

Number 3D punch - 1/2 capacity

No. 3D - 1/2" Capacity
2 foot $478, 4 foot $634., 6 foot $756.
8 foot $946.,10 foot $1135.,12 foot $1261
14 foot $1386, 16 foot $1576, 20 foot $2017.
Call for larger size prices.

No. 4 - 4" - 1/2" Capacity
2 foot $1063, 4 foot $1604., 6 foot $1924.
8 foot $2406., 10 foot $2886., 12 foot $3207.
14 foot $3528., 16 foot $4008., 20 foot $5130.
Call for larger size prices.

Click for American Machine Tools Home page

Privacy Clause

American Machine Tools Corp.
5864 Northwest Hwy
Chicago IL 60631 USA
Phone: 773-334-5000
Fax: 773-442-0314
sales @ AmericanMachineTools .com

Terms & Conditions

Frequently Asked Questions

Information in this website is subject to change without notice.
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.